Using The Countdown Timer - Yaesu FTM-500DR Advance Manual

Using the countdown timer

1. In the Timer/Clock function screen, press the SUB
DIAL knob.
2. Rotate the SUB DIAL knob to select [MODE] then
press the SUB DIAL knob several times to display
the count down timer screen.
z Set the timer
1. Rotate the SUB DIAL knob to select [SETUP] then
press the SUB DIAL knob.
The countdown timer setting screen will be displayed.
The factory default is 15 minutes.
2. Rotate the SUB DIAL knob to select [-] or [+] then
press the SUB DIAL knob to set the hour.
The hour can be set between 00 and 99.
3. Rotate the SUB DIAL knob to select [SETUP] then
press the SUB DIAL knob.
4. Rotate the SUB DIAL knob to select [-] or [+] then
press the SUB DIAL knob to set the minute.
The minute can be set between 00 and 59.
5. Rotate the SUB DIAL knob to select [SETUP] then
press the SUB DIAL knob.
z Start the timer
1. Rotate the SUB DIAL knob to select [START] then press the SUB DIAL knob.
• The countdown timer will start.
• When the set time has elapsed, a beep will sound.
z Stop the timer
1. Rotate the SUB DIAL knob to select [STOP] then press the SUB DIAL knob.
• To restart, rotate the SUB DIAL knob to select [START] then press the SUB DIAL
knob.
• To reset the timer to the set value, turn the SUB DIAL knob to select [RESET] then
press the SUB DIAL knob.
24