• Data cable "CT-167" (optional)
PKD (packet data input)
GND
PKS(PTT)
RX 9600 (9600 bps packet data output)
RX 1200 (1200 bps packet data output)
PK SQL (squelch control)
TXD (serial data output [transceiver PC])
RXD (serial data input [transceiver ! PC])
CTS (data communication control)
RTS (data communication control)
• Make sure to turn the power to the radio OFF before connecting.
• Refer to the TNC operating manual for instruction on connecting the TNC to a personal
computer.
• RF receive interference may occur because of noise occurring in the personal computer.
When signals cannot be received normally, keep the personal computer at a distance away
from the radio and use a photo-coupler and noise filter to connect.
z Packet communication settings
1. Press and hold the FUNC knob [69 COM PORT] Press the FUNC knob
2. Rotate the FUNC knob to select [SPEED] then press the FUNC knob.
3. Rotate the FUNC knob to select the desired communication speed then press the
FUNC knob.
The setting changes in the following order:
4800bps 9600bps 19200bps 38400bps 57600bps
Factory default value: 9600bps
4. Press the FUNC knob.
5. Rotate the FUNC knob to select [OUTPUT] then press the FUNC knob.
6. Rotate the FUNC knob to select [PACKET] then press the FUNC knob.
The setting changes in the following order:
OFF GPS OUT PACKET WAYPOINT
Factory default value: OFF
7. Press the [BACK] key twice.
8. Rotate the FUNC knob to select [70 DATA BAND] then press the FUNC knob.
9. Rotate the FUNC knob to select [DATA], then press the FUNC knob.
10. Rotate the FUNC knob to select the band to be used for the packet communication
then press the FUNC knob.
The setting changes in the following order:
MAIN BAND SUB BAND THIS BAND OTHER BAND ...
• Refer to "70 DATA BAND" (page 63) for details.
11. Press the [BACK] key twice.
To the transceiver
To the TNC etc.
Brown PKD (packet data input)
Black thick wire GND
Red
PKS (PTT)
Orange RX 9600 (9600 bps packet data output)
Yellow RX 1200 (1200 bps packet data output)
Green PK SQL (squelch control)
Blue
TXD (serial data output [transceiver PC])
Grey
RXD (serial data input [transceiver ! PC])
White
CTS (data communication control)
Black
RTS (data communication control)
34