Tx Power; Ams Tx Mode; Mic Gain; Vox - Yaesu FTM-500DR Advance Manual

8 TX POWER

Set the transmit power output.
1. Press and hold the FUNC knob  [8 TX POWER]  Press the FUNC knob
2. Rotate the FUNC knob to select the TX power output.
"LOW"  "MID"  "HIGH"
HIGH
50 W
NOTE: This item is registered in the custom function menu by factory setting.

9 AMS TX MODE

When operating in the AMS function, the transmit mode may be selected:
1. Press and hold the FUNC knob  [9 AMS TX MODE]  Press the FUNC knob
2. Rotate the FUNC knob to select the AMS transmit mode.
Transmit Mode
AUTO
(default)
TX FM FIXED
TX DN FIXED
(TX DIGITAL)
Refer to the Operating Manual for details.

10 MIC GAIN

The sensitivity (gain) of the microphone can be adjusted.
1. Press and hold the FUNC knob  [10 MIC GAIN]  Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
The sensitivity can be selected from the following 5 levels.
MIN / LOW / NORMAL / HIGH / MAX

11 VOX

Set the VOX (Voice Operated Transmit) function ON/OFF, and VOX delay time.
1. Press and hold the FUNC knob  [11 VOX]  Press the FUNC knob
Refer to the Operating Manual for details.
MID
25 W
Transmit
Automatically transmits in the com-
munication mode selected by the
AMS function.
Always transmits in the analog FM
mode.
Always transmits in the DN mode.
TX
LOW
5 W
Automatically selects the receive
mode corresponding to the received
signal.
47
Receive