Saving The Position Information Of A Member In The Memory - Yaesu FTM-400XDR Instruction Manual

Using Position Information
3
Press
The direction of the selected member will be
displayed in the compass.
The compass panel will show the direction with
the direction of advance of your own station on top
(Heading Up), and the compass needle will point in
the direction of the partner station.
The distance to the partner station is also displayed
at the top right of the compass.
Tip The "" on the left hand side of the call sign of the
partner station will blink.
When "" is blinking, the compass display will not
be updated even when signals containing position
information from stations other than that displayed are
received. When [YR] is pressed, "" will light up and the
compass display will be updated when signals containing
position information from stations other than that
displayed are received.
4
Press
Return to the list of group members.
Tip When configuring the screen display to show the altitude display screen and the timer / clock
display screen using [DISPLAY] → [1 DISPLAY SELECT] in the set-up menu, the screen will
switch in the following order each time
Compass / Latitude-longitude display screen → Altitude display screen → Timer / Clock screen
→ GPS screen → Original screen
Tips
• The position information can also be displayed using lat-long coordinates. The display can be
changed using [DISPLAY] → [2 TARGET LOCATION] in the set-up menu.
• When the GPS satellites are not acquired by your own station or the partner station, the position
information cannot be displayed in the compass unless it has been set up manually.

Saving the position information of a member in the memory

1
Display the position information of the member that
you would like to save in the memory
is pressed.
16