Compass; Display Mode; Tx Power; Ams Tx Mode - Yaesu FTM-200DR Advance Manual

6 COMPASS

Set the compass display.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
HEADING UP
NORTH UP
The default setting: HEADING UP

7 DISPLAY MODE

Displays screens for additional functions.
1. Press and hold the [F
2. Rotate the DIAL knob to select the function to be displayed then press the DIAL knob.
BACKTRACK：
ALTITUDE：
TIMER/CLOCK：
GPS INFORMATION： GPS Information screen (Page 21)
TX

8 TX POWER

Set the transmit power output.
1. Press and hold the [F
2. Rotate the DIAL knob to select the TX power output.
"LOW"  "MID"  "HIGH"
HIGH
50 W
NOTE: This item is registered in the custom function menu by factory setting.

9 AMS TX MODE

When operating in the AMS function, the transmit mode may be selected:
1. Press and hold the [F
2. Rotate the DIAL knob to select the AMS transmit mode.
Transmit Mode
AUTO
(default)
TX FM FIXED
TX DN FIXED
(TX DIGITAL)
Refer to the Operating Manual for details.
] key  [6 COMPASS]  Press the DIAL knob
MENU
The heading direction is indicated at the top of the compass.
The north direction is indicated at the top of the compass.
] key  [7 DISPLAY MODE]  Press the DIAL knob
MENU
Backtrack screen (Page 18)
Altitude screen (Page 22)
Timer/Clock screen (Page 23)
] key  [8 TX POWER]  Press the DIAL knob
MENU
MID
25 W
] key  [9 AMS TX MODE]  Press the DIAL knob
MENU
Transmit
Automatically transmits in the com-
munication mode selected by the
AMS function.
Always transmits in the analog FM
mode.
Always transmits in the DN mode.
LOW
5 W
Automatically selects the receive
mode corresponding to the received
signal.
47
Receive