Table of Contents
Advertisement
Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
H
E
F
I
K
D
A
C
Step 1: Logs A & B are placed directly at the middle back of the firebox.
These logs should fit together as shown.
Step 2: Log C is placed in front left of the media tray. Log D is placed
in the front right corner.
C
38
G
J
B
B
A
D
Split Oak Logset Installation
Step 3: Log F is placed in the front of the media tray. Log E is placed
next to log F (with space in between).
Step 4: Place log G resting between logs B and C, charred end down.
Log H is placed resting on logs E and D.
G
Step 5: Rest log I between log D and B. Log J is placed on logs D and
A, charred side in.
I
Step 6: Log K is placed in the front middle of the firebox, resting in the
connection between logs J and A .
Installation
DRSQ
DRSQ
42 46
E
F
H
J
K
XG0232 - 043021
Advertisement
Table of Contents
