Table of Contents
Advertisement
Traditional Logset Installation
Step 1: Log A is placed at the rear center of the media tray
Step 2: Log B is placed at the left corner of the firebox, with the charred
end resting on log A
Step 3: Place log C behind the pilot with the charred end wrapping
around to the center of the tray
Step 4: The cut end of log D points towards the front right corner of
the firebox, with the other end resting on log B
28
Step 5: Log E is placed diagonally directly in front of log A
Step 6: Rest log F on logs E and D
Step 7: Place log G on the lower section of log D with the other end
resting in the base media
Step 8: the y split end of log H rests in the media tray, with the other
end rests against log B
Installation
XG0230 - 052020
Hide quick links:
Advertisement
Table of Contents
