Omron E5EZ-PRR User Manual page 99

Initial Level
Functions
Settings
Reference
Functions
Settings
Reference
Select °C/°F
●
Set temperature input unit to "°C"or "°F"
Setting Range
c:°C/f: °F
●
Related parameters
"Input type" (initial level) (p. 5-21)
Set Point Upper Limit
Set Point Lower Limit
●
By setting the set points, this parameter can be used to limit upper or lower limit
values. Using the "set point upper limit" and "set point lower limit" parameters, set the
set point within the upper or lower limit set point specification range. If the current set
point exceeds the range, it will be forcibly returned to either the upper limit value or
lower limit value (whichever is closest).
●
When the temperature input type and temperature unit are changed, the set point
upper limit and set point lower limit will be forcibly returned to the sensor's upper or
lower limit value.
●
With temperature input, the decimal point is determined by the sensor currently in
use. During analog signal input, it is related to scaling.
Temperature input: E5EZ-PRR2 □ T
Parameters
Set point Set point lower limit +1 is the sensor
upper limit range upper limit
Set point lower Sensor range lower limit is the set point
limit upper limit-1
Analog input type: E5EZ-PRR2 □ L
Parameters
Set point Set point lower limit +1 is the sensor
upper limit range upper limit
Set point lower Sensor range lower limit is the set point
limit upper limit -1
●
Related parameters
"input type" (p. 5-21), "select °C/°F" (p. 5-23) (initial level)
Input type must be set to temperature
input
Initial Value
c
Setting Range
Setting Range
Initial Level
l. adj l. ini
l. ini
Units Initial Value
EU 1300
EU -200
Units Initial Value
EU 100
EU 0
5-23