Printing Using The Dpof Settings; Disconnecting The Cable From The Printer - Pentax Optio W60 Operating Manual

Printing Using the DPOF Settings

1
In the printing mode selection screen, use the four-way
controller (23) to select [DPOF AUTOPRINT].
2
Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (45) to check
the number of copies for each picture,
whether to insert the date or not, and the
total number of copies. Refer to p.177 for
instructions on how to make the DPOF
settings.
3
Press the 4 button.
A confirmation dialog appears.
Refer to Steps 7 to 13 of "Printing Single Images" (p.181 and p.182) for
details of changing print settings.
4
Press the 4 button.
The images are printed according to the settings.
6
Press the 3 button to cancel printing.
If the picture already has the date imprinted on it (p.127), do not set
Date O (On) in DPOF settings. Otherwise, the date could be
imprinted twice on your printed picture.

Disconnecting the Cable from the Printer

Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
184
100 - 0017 100 - 0017
100
Print with DPOF setting Print with DPOF se setting
Copies 0 1 Date
Total 1 0
Date Date Date
Cancel Cancel Cancel
MENU OK
0017
Print Print Print