Setting The Green Button - Pentax Optio W60 Operating Manual

3 button

Setting the Green Button

You can assign one of the following functions to the Green button;
[Green Mode] (p.66) and [Fn Setting] (p.122). You can activate the
assigned function by just pressing the Green button.
Assigning a Function (Green Mode)
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Press the four-way controller
(23) to select [Green Button].
3
Press the four-way controller (5).
The Green button setting screen appears.
4
Use the four-way controller (23)
to select the function you want to
register.
5
Press the 4 button.
The Green Button setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Green Mode is registered as the default setting.
Shutter release button
MENU
Four-way controller
4 button
Rec.Mode 1/3
Recorded Pixels 10
M
Quality Level
AWB
White Balance
AF Setting
AE Metering
Sensitivity AUTO
MENU Exit
Rec.Mode
Memory
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Exit
MENU
Green Button
Green Mode
Fn Setting
Cancel
MENU
800
4
3/3
Off
OK
OK
121