Printing Using The Dpof Settings; Disconnecting The Cable From The Printer - Pentax Optio E30 Operating Manual

Printing Using the DPOF Settings

1
In the printing mode selection screen, use the four-way
controller (23) to select [DPOF setting].
2
Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (45) to check
the number of copies for each picture,
whether to insert the date or not, and the
total number of copies. Refer to p.112 for
instructions on how to make the DPOF
settings.
3
Press the 4 button.
A confirmation dialog appears.
Refer to Steps 7 to 11 of "Printing Single Images" (p.116 and p.117) for
details of changing print settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.

Disconnecting the Cable from the Printer

Disconnect the USB/AV cable from the camera and printer when you
have finished printing.
1
Turn off the camera.
2
Disconnect the USB/AV cable from the camera and
printer.
100 - 0017 100 - 0017
100
Print with DPOF setting Print with DPOF setting
01
Copies Date
Total 10
MENU OK
Cancel Cancel Cancel
0017
Print Print
6
119