Installing The Sd Memory Card - Pentax Optio W60 Operating Manual

Installing the SD Memory Card

SD Memory Card socket
This camera uses an SD Memory Card. Captured images and sound files
are saved on the SD Memory Card if a card is inserted in the camera. They
are saved in the built-in memory if a card is not inserted. (p.37)
• Be sure to use this camera to format (initialize) an SD Memory
Card that is unused or has been used on other cameras or
digital devices. Refer to "Formatting an SD Memory Card"
(p.190) for instructions on formatting.
• Make sure that the camera is turned off before inserting or
removing the SD Memory Card.
• Allow the camera to dry completely before changing the SD
Memory Card. Avoid changing the card where the camera is likely
to get wet or dirty, and make sure that your hands are dry.
• Do not use excessive force when sliding the battery/card/terminal
cover open and closed because the waterproof packing may peel
off. If the packing is not in the correct position, the camera will not
be waterproof.
• The still picture storage capacity varies depending on the capacity
of the SD Memory Card and the selected number of recorded
pixels and quality level. (p.34)
• The power lamp blinks while the SD Memory Card is being
accessed (data is being recorded or read).
SD Memory Card
Battery/Card/Terminal cover
1
31