Setting Blink Detection - Pentax Optio W60 Operating Manual

3 button

Setting Blink Detection

For setting whether to use Blink Detection.
If the subject's eyes are closed and a picture is taken while both Blink
Detection and Face Priority are on, the "Closed eyes have been
detected." message appears in Instant Review.
1
Press the 3 button in A mode.
The [A Rec.Mode] appears.
2
Use the four-way controller (23) to select [Blink
Detection].
3
Use the four-way controller (45)
to select O (On) or P (Off).
The selected setting is saved.
4
Press the 3 button.
• When Face Priority is off, Blink Detection is also turned off,
regardless of the setting.
• When the Face Recognition function (p.59) does not work, "Blink
Detection" also does not function. Even if the subject's faces are
recognized, "Blink Detection" might not function depending on the
condition of the recognized faces.
• Even when Instant Review is set shorter than [3sec], the message
"Closed eyes have been detected." appears for 3 seconds.
MENU
Four-way controller
Rec.Mode 1/3
Recorded Pixels 10
M
Quality Level
AWB
White Balance
AF Setting
AE Metering
Sensitivity AUTO
MENU Exit
Rec.Mode
EV Compensation
Movie
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Exit
MENU
Exit Exit
800
3
2/3
0.0
1sec
61