Printing Using The Dpof Settings; Disconnecting The Cable From The Printer - Pentax OPTIO L40 Operating Manual

e_kb453.book Page 142 Monday, July 23, 2007 3:35 PM

Printing Using the DPOF Settings

1
In the printing mode selection screen, use the four-way
controller (23) to select [DPOF AUTOPRINT].
2
Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (45) to check
the number of copies for each picture, whether
to insert the date or not, and the total number
of copies. Refer to p.135 for instructions on
how to make the DPOF settings.
3
Press the 4 button.
A confirmation dialog appears.
Refer to Steps 7 to 11 of "Printing Single Images" (p.139, p.140) for
details of changing print settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
6
Press the 3 button to cancel printing.

Disconnecting the Cable from the Printer

Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
142
100 - 0017 100 - 0017
100 0017
Print with DPOF setting Print with DPOF setting
Copies 0 1 Date
Total 1 0
MENU Cancel Cancel Cancel OK Print Print