Printing Images Using The Dpof Settings; Disconnecting The Usb Cable - Pentax K20D Operating Manual

Printing Images Using the DPOF Settings

1
Use the four-way controller (23) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF settings screen
appears.
Use the four-way controller (45) to
check the number of copies for each
image, whether the date is imprinted or
not, and total number of copies. The
number of copies and the date setting are
set with the Print Service. (p.204)
3
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 11 of "Printing Single Images" (p.211) for details on
how to change the settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.

Disconnecting the USB Cable

Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
Downloaded From camera-usermanual.com Pentax Manuals
100-0046 100-0046 100-0046
Print w/DPOF settings Print w/DPOF settings Print w/DPOF settings
Copies Copies Copies 1 1
Total Total Total 10 10 10
OK
MENU
213
Date Date Date
Print Print Print
9