Setting The Functions (Program Mode) - Pentax Optio W60 Operating Manual

Setting The Functions (Program Mode)

In R (Program) mode, the shutter speed and the aperture are set
automatically by the camera during shooting. However, you can select
other functions such as the flash mode and recorded pixels.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Program).
3
Press the 4 button.
4
Set the functions you want to use.
Refer to "Setting the Shooting Functions"
(p.100 - p.127) for details of how to set the
functions.
5
Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Taking Still Pictures 1p.43
Shutter release button
Four-way controller
4 button
07/07/2008 07/07/2008 07/07/2008
4
38 38 38
14:25 14:25 14:25
65