Recording A Movie From Pictures Taken At A Set Interval (Interval Movie) - Pentax Optio W60 Operating Manual

Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
In this mode, you can record multiple still pictures taken automatically at
a set interval from a set time, as a movie file.
You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or
Interval
1 hour.
Set the total time, from 10 minutes to 359 hours. The total time and
the settable units change depending on the interval set. The Interval
Total Time
can be set in increments of 1 minute, 5 minutes, 10 minutes, 30
minutes, or 1 hour.
Set the start delay, from 0 minutes to 24 hours. The start delay can
be set in increments of 1 minute for a delay time up to 59 minutes,
Start Delay and increments of 1 hour for a delay time longer than one hour. If
the start delay is set to 0 min., the first picture is taken as soon as
the shutter release button is pressed.
1
Press the four-way controller (2) in C or
2
Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current Interval Movie setting appears
for approximately one minute. To take
pictures with the current setting, go to Step
10.
3
Press the 4 button while the setting is displayed.
The Interval Movie setting screen appears. [Interval] is marked with the
frame.
Shutter release button
MENU
Four-way controller
4 button
Rec.Mode 1/3
Recorded Pixels 10
M
Quality Level
AWB
White Balance
AF Setting
AE Metering
Sensitivity AUTO
MENU Exit
mode.
Drive Mode Drive ve Mode
Interva Interval Shoot val Shoot
Cancel Cancel Cancel
MENU
800
4
OK OK OK
OK
137