Introduction; General Introduction; Purpose Of The Manual; Instructions On Reading From Smartphones - Stiga A1500 Instruction Manual

3.

INTRODUCTION

3.1.

GENERAL INTRODUCTION

3.1.1. PURPOSE OF THE MANUAL

This manual is an integral part of the device and it is intended to provide the information necessary for its
use.
Keep this manual for the entire life of the device, so that it is always available in case of need.
The recipient of the manual is the user of the device, who is required to carefully read the information
contained therein and apply it rigorously to protect people's safety and to avoid damage.
The information is drawn up in the original language of the manufacturer (Italian) and translated into any
other languages for legislative and/or commercial needs.
The following symbols have been adopted to highlight important texts.
DANGER \ CAUTION \ WARNING:
The pictograms contained in a triangle with a yellow background and a black line
indicate danger \ caution\ warning.
BAN:
The pictograms contained in a crossed-out circle with a white background and a red
stroke indicate a ban.
OBLIGATION:
The pictograms contained in a circle with a blue background indicate an obligation.
NOTE: The texts shown in this form indicate technical information of particular importance,
which should not be ignored.
3.1.2. INSTRUCTIONS FOR READING FROM SMARTPHONE
For better readability of the user manual, it is recommended to keep the smartphone in an horizontal
position, as shown in the picture.
1.2 Panoramica del prodotto
1.2.1 Descrizione generale
Il robot rasaerba (1) è progettato e costru
l'erba di giardini in qualunque ora del gio
In funzione delle diverse caratteristiche d
può essere programmato in modo da lav
In fase di lavoro, il robot e ettua la rasatu
perimetrale (2).
8 3. INTRODUCTION
1.2 Panoramica del prodotto
1.2.1 Descrizione generale
Il robot rasaerba (1) è progettato e costruito per rasare automaticamente
l'erba di giardini in qualunque ora del giorno e della notte.
In funzione delle diverse caratteristiche della super cie da rasare, il robot
può essere programmato in modo da lavorare su più aree.
In fase di lavoro, il robot e ettua la rasatura dell'area delimitata dal lo
perimetrale (2).
EN