Air Blow (Option); Air Blow Operation - Siemens PUMA V400/M Operation Manual

11.

Air blow (Option)

Air blow is the device to inject air in order
to remove
workpiece and chuck before and after
machining.
Air blow can not be operated by manual
but be operated by commanding M-code
during automatic operation.
11.1

Air blow operation

According the setting of machine data setting, operation method after commanding is
different. Please enable the "Air blow with spindle rotating" on the Easy Extend Screen to
rotate the spindle during air blowing.
chips that attached to
Chuck
Air Pipe
OPERATION | 73