Lexmark MS531 User Manual page 89

Use printer menus
Menu item
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
MTU
256–1500 Ethernet (1500*)
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Off*
On
TLS Support
Enable TLSv1.0 (Off)
Enable TLSv1.1 (Off*)
Enable TLSv1.2 (On*)
SSL Cipher List
TLSv1.3 SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
SNMP Versions 1 and 2c
Enabled
Off
On*
Allow SNMP Set
Off
On*
Enable PPM MIB
Off
On*
SNMP Community
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the access option for IP addresses that are not in the list.
Note: This menu item is available only in some printer models.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Set the maximum transfer rate of the printer.
Note: When enabled, the option for this setting is 100–1000000
Kilobits/second.
Enable the Transport Layer Security protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
Specify the specific cipher string to use for TLS v1.3.
Description
Configure Simple Network Management Protocol (SNMP) versions 1
and 2c to install print drivers and applications.
89