Lexmark MS531 User Manual page 88

Use printer menus
Menu item
Set Hostname
Domain Name
Allow DHCP/BOOTP to update
NTP server
On*
Off
Zero Configuration Name
Enable Auto IP
Off
On*
DNS Server Address
Backup DNS Address
Backup DNS Address 2
Backup DNS Address 3
Domain Search Order
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
Off
On*
WINS Server Address
Enable BOOTP
Off*
On
Restricted Server List
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the current TCP/IP host name.
Set the domain name.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Specify a service name for the zero configuration network.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update the multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify the IP addresses that are allowed to communicate with the printer over
TCP/IP.
Notes:
•
Use a comma to separate each IP address.
•
You can add up to 50 IP addresses.
•
This menu item is available only in some printer models.
88