Lexmark MS531 User Manual page 63

Use printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
Use SSL/TLS (Disabled*)
E‑mail Alerts Setup
E‑mail Setup
Require Trusted Certificate (On*)
E‑mail Alerts Setup
E‑mail Setup
SMTP Server Authentication (No
authentication required*)
E‑mail Alerts Setup
E‑mail Setup
Device‑Initiated E‑mail (None*)
E‑mail Alerts Setup
E‑mail Setup
User‑Initiated E‑mail (None*)
E‑mail Alerts Setup
E‑mail Setup
Use Active Directory Device Credentials
(Off*)
E‑mail Alerts Setup
E‑mail Setup
Device Userid
E‑mail Alerts Setup
E‑mail Setup
Device Password
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
E‑mail Alerts Setup
E‑mail Setup
Disable "SMTP server not set up" error (Off*)
Error Prevention
Jam Assist
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Send an e‑mail using an encrypted link.
Require a trusted certificate when accessing the SMTP server.
Set the authentication type for the SMTP server.
Set whether credentials are required for device‑initiated
e‑mails.
Set whether credentials are required for user‑initiated e‑mails.
Note: This menu item is available only in some printer
models.
Enable user credentials and group designations to connect to
the SMTP server.
Specify the user ID to connect to the SMTP server.
Specify the password to connect to the SMTP server.
Specify the realm for the Kerberos 5 authentication protocol.
Specify the domain name for the NTLM security protocol.
Disable an SMTP setup error message to appear on the
display.
Set the printer to check for jammed paper automatically.
63