Table of Contents
Advertisement
Basic
features!
Programming table
Code
Display & Feature
SET DATE & TIME
#01
To set the date and time.
YOUR LOGO
#02
To set your logo.
YOUR FAX NO.
#03
To set your facsimile telephone
number.
SENDING REPORT
To print and check the sending
#04
report for fax transmission results
(p. 34).
TAD RING COUNT
To change the number of rings
before the unit answers a call
in TAD/FAX mode
#06
FAX RING COUNT
To change the number of rings
before the unit answers a call
in FAX ONLY mode
Features Summary
Settings
mm/dd/yy
See page 17 for details.
hh:mm
(2 digits for
each entry)
See page 18 for details.
(Up to 30
characters)
See page 20 for details.
(Up to 20
digits)
"ERROR": The sending report will
ERROR
be printed only when fax
transmission fails.
ON
"ON": The sending report will be
OFF
printed out after every transmission.
This setting is also available after
1, 2, 3, 4
activating TAD/FAX mode.
See page 50 for details.
TOLL SAVER
RINGER OFF
This setting is also available after
activating FAX ONLY mode (p. 43).
1, 2, 3, 4
(The default setting is in bold type.)
How the unit operates
61
Advertisement
Table of Contents
