1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Fax Machine
  5. KX-FL501
  6. Paper

Panasonic KX-FL501 Paper

Compact laser plain paper fax
Hide thumbs Also See for KX-FL501:
Table of Contents

Advertisement

Quick Links

Download this manual
Compact Laser Plain Paper FAX
KX-FL501
(for U.S.A.)
© 2000 Kyushu Matsushita Electric Co., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO. KMF0002391C1
F7
Unauthorized
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-FL501

Summary of Contents for Panasonic KX-FL501

  • Page 1 ORDER NO. KMF0002391C1 Compact Laser Plain Paper FAX KX-FL501 (for U.S.A.) © 2000 Kyushu Matsushita Electric Co., Ltd. All rights reserved. Unauthorized copying distribution is a violation of law.
  • Page 2 KX-FL501 CONTENTS Page Page 1 INTRODUCTION 4.17. HOW TO REMOVE THE MOTOR BLOCK3 1.1. SAFETY PRECAUTIONS 4.18. INSTALLATION POSITION OF THE LEAD (1) 1.2. INSULATION RESISTANCE TEST 4.19. INSTALLATION POSITION OF THE LEAD (2) 1.3. FOR SERVICE TECHNICIANS 4.20. INSTALLATION POSITION OF THE LEAD (3) 1.4.
  • Page 3 KX-FL501 10.6. FUSER BLOCK 14 PRINTED CIRCUIT BOARD 10.7. MAIN FRAME BLOCK 14.1. DIGITAL BOARD 10.8. MOTOR BLOCK 14.2. ANALOG BOARD 10.9. ACTUAL SIZE OF SCREWS AND WASHER 14.3. POWER SUPPLY BOARD 11 ACCESSORIES AND PACKING MATERIALS 14.4. OPERATION BOARD 12 REPLACEMENT PARTS LIST 14.5.

  • Page 4: Safety Precautions

    KX-FL501 1 INTRODUCTION 1.1. SAFETY PRECAUTIONS 1. Before servicing, unplug the AC power cord to prevent an electric shock. 2. When replacing parts, use only the manufacturer´s recommended components. 3. Check the condition of the power cord. Replace if wear or damage is evident.

  • Page 5: Personal Safety Precautions

    KX-FL501 1.5. AC CAUTION For safety, before closing the lower cabinet, please make sure of the following precautions. 1. The earth lead is fixed with the screw. 2. The AC connector is connected properly. 3. Wind the earth lead around the core 5 times.

  • Page 6: Service Precautions

    KX-FL501 1.6.2. LIVE ELECTRICAL SECTIONS All the electrical sections of the unit supplied with AC power by the AC power cord are live. Never disassemble the unit for service with the AC power supply plugged in. CAUTION: AC voltage is supplied to the primary side of the power supply unit. Therefore, always unplug the AC power cord before disassembling for service.
  • Page 7 KX-FL501 1.8. FEATURES General Large Memory (24 pages)... Performed by DRAM · Help function Approx. 170 pages of memory reception Please refer to .(P.27) to print below features. Approx. 120 pages of memory transmission Display: 1. QUICK SET UP Integrated Telephone System ·...

  • Page 8: Specifications

    KX-FL501 1.9. SPECIFICATIONS Applicable Lines: Public Switched Telephone Network Document Size: Max. 216 mm (8 1/2") in width Max. 600 mm (23 5/8") in length Effective Scanning Width: 208 mm (8 3/16") Recording Paper Size: Letter: 216×279 mm (8 1/2"×11") Legal: 216×356 mm (8 1/2"×14")

  • Page 9: Test Chart

    KX-FL501 1.11. TEST CHART 1.11.1. ITU-T No.1 TEST CHART...
  • Page 10 KX-FL501 1.11.2. ITU-T No.2 TEST CHART...

  • Page 11: Location Of Controls

    KX-FL501 1.12. LOCATION OF CONTROLS 1.12.1. OVERVIEW Note: *The document stacker and paper stacker may not be shown in all illustrations.
  • Page 12 KX-FL501 1.12.2. CONTROL PANEL...
  • Page 13 KX-FL501 1.13. CONNECTIONS (1) Connect the handset cord. (2) Connect the telephone line cord. (3) Connect the power cord. · When the power is turned on for the first time, the unit will print some basic information. Note: · For additional equipment protection, we recommend the use of a surge protector. The following types are available;...

  • Page 14: Installation Space

    KX-FL501 1.14. INSTALLATION 1.14.1. INSTALLATION SPACE The space required to install the unit is shown below. The dimensions given are necessary for the unit to operate efficiently. Note: · Avoid excessive heat or humidity. · Use the unit within the following ranges of temperature and humidity.

  • Page 15: Installing The Recording Paper

    KX-FL501 1.14.3. INSTALLING THE RECORDING PAPER Letter* or legal** size recording paper can be loaded. The unit can hold up to 150 sheets of 60 g/m to 75 g/m (16 lb. to 20lb.) paper or 120 sheets of 90 g/m (24 lb.) paper.
  • Page 16 KX-FL501 1.14.4. ADDING PAPER TO THE PAPER TRAY Remove all of the installed paper. Add paper to the removed paper and straighten. Fan the stack of paper. Insert the paper into the recording paper entrance. 1.14.5. DOCUMENTS THE UNIT CAN FEED Note: ·...

  • Page 17: Setting Your Logo

    KX-FL501 1.14.6. SETTING YOUR LOGO The logo can be your company, division or name. 1. Press Display: 2. Press , then 3. Press 4. Enter your logo, up to 30 characters, using the dial keypad. Example: Bill 1. Press twice.
  • Page 18 KX-FL501 1.14.7. TO SELECT CHARACTERS WITH THE DIAL KEYPAD 1.14.8. TO SELECT CHARACTERS USING THE JOG DIAL Instead of pressing the dial keys, you can select characters using the JOG DIAL. 1. Rotate unit the desired character is displayed. 2. Press to move the cursor to the next space.

  • Page 19: Replacing The Toner Cartridge And The Drum Unit

    KX-FL501 1.14.9. REPLACING THE TONER CARTRIDGE AND THE DRUM UNIT When the display shows the following message, replace the toner cartridge and drum unit with new ones. The following is available for replacement. KX-FA76: Toner cartridge KX-FA77: Drum unit Caution: ·...
  • Page 20 Remove the protection bar from the drum unit. With Panasonic face up on the toner cartridge, match the red arrows on the cartridge and the drum unit. 7. Slide the tab of the toner cartridge into the slot of the drum unit.
  • Page 21 KX-FL501 11. Install the drum and toner unit by holding the tabs. · If the lower glass is dirty, clean it with a soft dry cloth. 12. Close the front cover securely by pushing down on both sides. Waste disposal method ·...

  • Page 22: Maintenance Items And Component Locations

    KX-FL501 1.15. MAINTENANCE ITEMS AND COMPONENT LOCATIONS 1.15.1. OUTLINE MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS. 1. Periodic maintenance Inspect the equipment periodically and if necessary, clean any contaminated parts. 2. Check for breakdowns Look for problems and consider how they arose.
  • Page 23 KX-FL501 1.15.2. MAINTENANCE CHECK ITEMS/COMPONENT LOCATIONS...
  • Page 24 KX-FL501 1.15.2.1. MAINTENANCE LIST OPERATION CHECK REMARKS Document Path Remove any foreign matter such as paper. — Rollers If the roller is dirty, clean it with a damp cloth then dry Refer to (P.25). thoroughly. Platen Roller If the platen is dirty, clean it with a damp cloth then dry —...

  • Page 25: Cleaning The Inside Of The Unit

    KX-FL501 1.15.3. MAINTENANCE 1.15.3.1. CLEANING THE INSIDE OF THE UNIT If any of the following problems occurs, clean the inside of the unit: —If misfeeding of your original occurs frequently. —If a black line, a white line or a dirty pattern appears on your recording paper, on your original, or on the fax document received by the other party.
  • Page 26 KX-FL501 7. Clean the lower glass with a soft dry cloth. 8. Reinstall the drum and toner unit by holding the tabs. 9. Close the front cover securely by pushing down on both sides. 10. Reconnect the power cord and the telephone line...

  • Page 27: Troubleshooting Guide

    KX-FL501 2 TROUBLESHOOTING GUIDE 2.1. TROUBLESHOOTING SUMMARY 2.1.1. TROUBLESHOOTING After confirming the problem by asking the user, troubleshoot according to the instructions and observe the following precautions. 2.1.2. PRECAUTIONS 1. If there is a problem with the print quality or the paper feed, first check if the installation space and the print paper meets the specifications, the paper selection lever/paper thickness lever is set correctly, and the paper is set correctly without any slack.

  • Page 28: User Recoverable Errors

    KX-FL501 2.2. USER RECOVERABLE ERRORS If the unit detects a problem, one or more of the following messages will appear on the display. Note: The explanations given in the [ ] are for servicemen only. CROSS REFERENCE: (P.7) (P.30) (P.120)
  • Page 29 KX-FL501 CROSS REFERENCE: (P.30) (P.31) Note: The explanations given in the [ ] are for servicemen only.

  • Page 30: Document Jams

    KX-FL501 2.2.1. DOCUMENT JAMS If the unit does not release the document during feeding, remove the jammed document as follows. 1. Push the front cover open button then open the front cover. 2. Pull down the middle guide while holding the front cover.

  • Page 31: Recording Paper Jams

    KX-FL501 2.2.2. RECORDING PAPER JAMS If the unit does not eject any recording paper during reception or copying, the recording paper has jammed and the display will show the following massage. When paper has jammed under the cartridge. Display: Remove the jammed paper as follows.
  • Page 32 KX-FL501 4. Remove the recording paper. Straighten and reinsert it into the recording paper entrance.

  • Page 33: Troubleshooting Details

    KX-FL501 2.3. TROUBLESHOOTING DETAILS 2.3.1. OUTLINE Troubleshooting is for recovering quality and reliability by determining the broken component and replacing, adjusting or cleaning it as required. First, determine the problem then decide the troubleshooting method. If you have difficulty finding the broken part, determine which board is broken.
  • Page 34 KX-FL501 2.3.3. TROUBLESHOOTING ITEMS TABLE CROSS REFERENCE: (P.36) (P.54) (P.83) (P.86)
  • Page 35 KX-FL501 2.3.3.1. SIMPLE CHECK LIST CROSS REFERENCE: (P.114)
  • Page 36 KX-FL501 2.3.4. PRINT 2.3.4.1. GHOST IMAGE...
  • Page 37 KX-FL501 2.3.4.2. DARK AND WHITE VERTICAL LINE Note: When wiping the cover glass, reflecting mirror and LSU lens, use a dry and soft cloth.
  • Page 38 KX-FL501 2.3.4.3. DARK OR WHITE HORIZONTAL LINE...
  • Page 39 KX-FL501 2.3.4.4. DIRTY AND HALF DARKNESS BACKGROUND...
  • Page 40 KX-FL501 2.3.4.5. BLACK PRINT...
  • Page 41 KX-FL501 2.3.4.6. LIGHT PRINT...
  • Page 42 KX-FL501 2.3.4.7. BLACK DENSITY IS LIGHT OR UNEVEN.
  • Page 43 KX-FL501 2.3.4.8. BLANK PRINT...
  • Page 44 KX-FL501 2.3.4.9. BLACK, WHIT POINT...
  • Page 45 KX-FL501 2.3.5. RECORDING PAPER FEED 2.3.5.1. Multiple feed 2.3.5.2. The printing paper is waved or wrinkled...
  • Page 46 KX-FL501 2.3.5.3. Skew...
  • Page 47 KX-FL501 2.3.5.4. The recording paper does not feed...
  • Page 48 KX-FL501 2.3.6. ADF(Auto document feed) section 2.3.6.1. No document feed...
  • Page 49 KX-FL501 2.3.6.2. Document JAM...
  • Page 50 KX-FL501 2.3.6.3. Multiple feed...

Table of Contents