BASE FRAME
REMOVING/INSTALLING THE FRONT AND REAR
SHROUDS (FIGURE 3)
REMOVING
1. Remove the two (2) mounting screws and washers that secure the front or rear shroud
to the base frame.
2. Remove shroud.
INSTALLING
1. Position shroud in place and secure with two (2) mounting screws and washers. Torque
mounting screws to 40-in./lbs.
Mounting
Washer
Screws
Washer
FIGURE 3 - REMOVING/INSTALLING THE FRONT AND REAR SHROUDS
Part No. 1110516
Rear
Shroud
55
PROCEDURE 7
Base
Frame
Front
Shroud
Washer
Washer
Mounting
Screws
XTERRA GT