Table of Contents
Advertisement
1. To add a tour sequence, click the green Add Tour button
The following panel will appear.
MPU955 Admin Console will automatically assign the next available ID.
2. Fill in an area and local number
Be aware that changing the area may affect other configured
components such as alarm target assignments.
3. Give the tour a descriptive name
4. Add a camera in the Sequence of Steps
Double-click on a camera ID in the list on the right. It will automatically insert that
camera number in step one. Double-clicking on another camera ID will automatically
insert that camera number into step 2, and so on.
5. Type a preset number associated with each specific camera in the CPreset
column
Enter a "0" to indicate no preset associated with that camera.
Configuration
95
Advertisement
Table of Contents
