Table of Contents
Advertisement
1. To add a group preset, click the green Add Preset button
The following panel will appear.
MPU955 Admin Console will automatically assign the next available ID.
2. Fill in the area and local number
3. Give the group preset a descriptive name
4. Add camera to monitor pairs to the Set of View section by clicking on the ID
numbers for each as needed
Double-click on a camera and a monitor from the lists on the right. It will automatically
insert that camera and monitor ID in step one. Double-clicking on another camera and
monitor will automatically insert that camera and monitor ID into step 2, and so on.
5. Type a preset number associated with a specific camera in the CPreset
column
Enter a "0" to indicate no preset associated with that camera.
To enter the same value in several steps, highlight desired cells using the click
and drag method. Type in a value and press the enter key. All highlighted cells
will be filled with the typed value.
Configuration
101
Advertisement
Table of Contents
