Table of Contents
Advertisement
3. Highlight a row, a column, or click and hold the mouse button
4. Click the Invert Grid Selection button to change the state of
5. Click on the Permit All button to turn the entire grid green –
6. Click on the Deny All button to turn the entire grid white –
7. Click on the Copy Grid button to copy the permission grid
When copying a grid, a confirmation message will appear asking "Are you sure you want
to COPY the Recorder permission for this Controller?" and explaining the copying rules:
[1] Permissions will be copied by Controller ID.
[2] If permission already exists for a Controller that falls within the Target
range, that original permission will be overwritten.
8. Click Yes to continue or No to cancel
The copy source is the highlighted controller ID from where the recorder permissions
will be copied.
9. Enter the Target ID range of recorder ID numbers, with the beginning
number in the START box, and the ending number in the END box
Permissions existing for controllers within the specified range will be
overwritten.
Configuration
to highlight a group of recorders
the permission for the highlighted group, or
allowing all recorders to be seized by the specified controller,
or
denying the selected controller access to all recorders, or
from a specific controller to other controllers
76
Advertisement
Table of Contents
