Table of Contents
Advertisement
Channels Tab
Each digital recorder provides a number of video channels (depending on the model of
recorder). The Channels tab is used to specify which camera is connected to each of the
recorder's channels.
1. Double-click in the blank field of the channel number you want to specify a
camera for
2. Double-click on the camera that you wish to specify for this video channel
3. Click the green check mark to save the selection
You can only select cameras that are already configured for use by Admin
Console, and you need to know which channel they are connected to before
working on this tab. Recording is only possible from cameras that are
physically connected.
Permissions
Controller Tab
The Controller permission tab on the Digital Recorder window allows an administrator
to specify which controllers can seize the selected recorder. It shows permissions from
Configuration
71
Advertisement
Table of Contents
