Panasonic WJ-MPU955 User Manual page 133

Admin console
Hide thumbs Also See for WJ-MPU955:
Table of Contents

Advertisement

A L A R M N O T I F I C A T I O N
F i e l d D a t a
Alarm
Description: Specifies a retry timer for an alarm notification. When GX device does not
receive a response of an alarm notification packet, it sends the same packet after this timer
Retransmission
expires.
Timer
Validation: decimal numeral 0-255
Default Setting: 10
Control Site Description: Specifies IP address of the camera control site.
Validation: 0 for WJ-MPU955, 1 for other device. When this value is set to 1, Control Address
is effective.
Default Setting: (None)
Control Address Description: Specifies IP address of the camera control site.
Validation: Dotted decimal format IP address - 0.0.0.0 to 255.255.255.255
Default Setting: (None)
Comment Description: A string to put comment notes.
Validation: Within 16 characters.
Default Setting: (None)
Digital System Setup
D I G I T A L S Y S T E M S E T U P
F i e l d D a t a
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a
system domain. Its format is shown as below:
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved]
Default Setting: 0x0F000XXX is for encoder, 0x1F000XXX is for decoder.
XXX is the value registered in Address[SW1] of the previous page .
Note: See MPEG2 Encoder and MPEG2 Decoder Operating Instructions.
Device Name Description: A String to help operator to identify a GX device.
Validation: Within 16 characters.
Default Setting: (None)
DNS Description: Specifies a DNS operational mode.
Validation: 0 = Disable, 1 = Enable
Default Setting: 0
DNS Server Description: Specifies a DNS server IP address.
Validation: Dotted decimal format IP address.
Default Setting: (None)
NTP Description: Specifies a NTP operational mode
Validation: 0 = Disable, 1 = Enable
Default Setting: 0
NTP Server Host
Description: Specifies a NTP server IP address.
IP Address
Validation: Dotted decimal format IP address.
Default Setting: (None)
Appendix A
_ _ _ _ _ X X X
device id (by rotary SW of an encoder front panel)
X X X X X _ _ _
device type
129

Advertisement

Table of Contents
loading

Table of Contents