Table of Contents
Advertisement
The permission grid's dimensions are based on the maximum capacity for the
chosen CPU size, not on physically installed components already in the
database.
The Cam View permission tab allows an administrator to permit or deny a controller to
view specific cameras.
Copying Cam View permissions to other system controllers will also copy
Cam Ctrl permissions to the specified controllers.
Denying a system controller to view a certain camera will automatically deny
the same controller to control the specified camera.
The Monitor permission tab allows an administrator to permit or deny a controller's
ability to seize a specific monitor.
A monitor ID, if unknown, can be determined by its area and local number,
by entering each value into the appropriate boxes, and then clicking the
"Search for Monitor by Area & Local" button.
The Group Seq (not currently supported) permission tab allows an administrator to
permit or deny a controller's ability to control a group sequence.
If the group sequence ID is unknown, you can enter the area and local
numbers of the sequence in the appropriate boxes, and click the "Search
for Group Seq by Area & Local" button.
The Alarm permission tab allows an administrator to permit or deny a controller's ability
to seize a specific alarm.
The Recorder permission tab allows an administrator to permit or deny a controller's
ability to seize a specific recorder (see section on Digital Recorders)
The Alarm I/O permission tabs allows an administrator to permit or deny a controller's
ability to seize a specific IO port.
Configuration
68
Advertisement
Table of Contents
