Table of Contents
Advertisement
2. Enter an ID number and descriptive name for the class record you are
creating
3. Choose the privileges to grant the class by checking the boxes to the left of
the desired privileges
Be careful when assigning the CAM Lock privilege. When an
operator uses CAM Lock, every camera in the system is locked.
Other users can select cameras normally, but cannot control them.
Operators with the CAM Lock Override privilege can override locked
cameras on a camera-by-camera basis, as determined by priorities.
4. Click the green check mark to add the class of operators, or click the red X
to cancel
You can add, edit, delete, or replicate class IDs as needed using the four icons at the
bottom of this window.
The Other tab of the Operator Classes window can be used to view a list of the
operators that are assigned to the class selected.
Configuration
86
Advertisement
Table of Contents
