Table of Contents
Advertisement
After the "01A" and "01B" CPU system files have been retrieved for the first time, it will
be possible to save these files to a different location, such as to floppy diskette. These
files (01A=sys.ini and 01B=sys.ini) are stored in the "\Program
Files\Panasonic\GXLAC\SysIni" folder on the MPU955 Admin Console computer's hard
drive. Performing a backup from the SYS Archive section will save a copy of the
specified system file to an alternate location of your choice.
1. Choose "01A" from the SYS Archive drop-down menu
2. Click the Backup button under the SYS Archive section
3. When the "Browse for Folder" window appears, browse to the desired
location
4. Click the OK button
5. Repeat for the "01B" system file if needed
At some time, it may be necessary to restore or replace the current system files with a
saved (backed up) version, for example, during system troubleshooting. The restore
function will copy the "01A=sys.ini" and "01B=sys.ini" files from the location you
specify, and put them into the "\Program Files\Panasonic\GXLAC\SysIni" directory on
the MPU955 Admin Console computer's hard drive.
1. Choose "01A" from the SYS Archive drop-down menu
2. Click the Restore button under the SYS Archive section
3. When the "Browse for Folder" window appears, browse to the location that
the saved system file resides
This should be the location you backed the file up to.
4. Click the OK button
The system file (01A=sys.ini) that is stored in the "\Program
Files\Panasonic\GXLAC\SysIni" folder will be replaced with the file from the location
that you specified.
Configuration
Backing Up
Restoring
32
Advertisement
Table of Contents
