Table 26. Hard Drive Led Function Definitions - Intel SR2612UR Product Specification

System Board Interconnects
LED Function
1. Not Used
2. Disk Status
3. Disk Activity
The hard drives directly control the activity LED functionality. This causes the LED to
function differently between SAS and SATA drives.
Note: The drive status LED may also be set by the add-in SAS RAID controller or by RAID
management software to represent different RAID array states. Refer to the RAID controller or
software documentation.
36

Table 26. Hard Drive LED Function Definitions

Color
N/A N/A
Repeating cycle of Green for 250
milliseconds/Off for 250 milliseconds
Amber On constantly
Repeating cycle of Amber for 250
milliseconds/Off for 250 milliseconds
Repeating cycle of Amber for 500
milliseconds/Green for 500 milliseconds
Repeating cycle of Amber for 500
milliseconds/Green for 500 milliseconds
(Green On constantly with Midplane firmware
105 or later)
Green / Amber
Repeating cycle of Amber for 500
milliseconds/Green for 500 milliseconds
Repeating cycle of Amber for 500
milliseconds/Green for 500 milliseconds
Repeating cycle of Amber for 500
milliseconds/Green for 500 milliseconds
Repeating cycle of Green for 750
milliseconds/Off for 250 milliseconds
Repeating cycle of Green for 500
milliseconds/Off for 500 milliseconds
Repeating cycle of Green for 500
milliseconds/Off for 500 milliseconds
Green Off
Green
Green On
Green Flash
Intel order number E76293-003
Intel® Server System SR2612UR TPS
Flash Pattern Indication
N/A
Identify
Fault
Predicted Fail
Reserved Device
Hot Spare
Consistency
Check
In Critical Array
In Failed Array
Rebuild
Prepare for
Operation
Prepare for
Removal
SATA Hard Drive
No Activity
SAS Hard Drive
No Activity
Drive Activity
Revision 1.3