Table of Contents
Advertisement
®
PROFINET
9.
Select the DXM GSD file.
10. Click Install.
S
R
:
The system installs the DXM GSD file and places it in the Hardware catalog. In the example, the DXM GSD file is
TEP
ESULT
located under Other field devices > PROFINET IO > Banner Engineering Corp. > Banner.
A
C
T
T
FTER
OMPLETING
HIS
ASK
If the DXM GSD file does not install properly, save the log and contact Banner Engineering Corp.
9.5.2. Change the Device IP Address
Follow these instructions to change the IP address of the DXM device using the Siemens TIA Portal (v14) software. Use these instructions as a
basis if you are using another controller (PLC).
1.
Launch the Siemens TIA Portal (v14) software.
2.
Click Open existing project.
3.
Select a project and open it.
Click Devices & networks.
4.
The Network view displays.
S
R
:
TEP
ESULT
5.
Double-click on the DXM icon to open the Device view screen.
6.
Click on the DXM icon in the graphic area of the Device view screen.
The Module properties window displays and the module can now be configured.
S
R
:
TEP
ESULT
52
:
© Banner Engineering Corp. www.bannerengineering.com
Figure 4: Hardware catalog
Figure 5: Network view
Advertisement
Table of Contents
