Table of Contents
Advertisement
LCD
M
S
AND
ENU
YSTEM
•
The status and time fields indicate the success or failure of the last attempted push and the time of the last attempted push.
6.3. ISM Radio
The ISM Radio menu allows the user to view the Modbus ID of the internal ISM radio, enter binding mode, or run a site survey. This top-level
ISM Radio menu is different from the System Config > ISM Radio submenu.
ISM Radio
The first option under the ISM Radio menu only displays the type of radio in the DXM1200 (MultiHop or DX80 Star) and the Modbus ID of the
radio. To change the ISM Radio Modbus ID refer to the System menu.
Select Binding to enter binding mode or select Site Survey to run a site survey.
Binding— All ISM radio devices must be bound to the internal Gateway/client device before the DXM1200 can access wireless devices. The
first submenu under binding allows the user to set the wireless address of the device to bind with. This is required to bind with wireless devices
that do not have rotary dials (for example M-GAGEs, ultrasonic sensors, and Q45 devices). See
8. For more information on binding a particular device, refer to the individual datasheet.
ISM Radio on page
Site Survey—After creating a wireless network using the binding process, run a site survey on each device to see the link quality. See
a Site Survey from the DXM on page
6.4. System Config
Use the System Config menu to set DXM1200 system parameters.
System Config
The System Config submenus are:
•
ISM Radio
•
Ethernet
•
Provision Cell
34
MultiHop/DX80 ID
Binding
Bind to > 1
Node/Modbus ID > 1
Site Survey
Please Wait...
Site Survey results OR Failed to start Site Survey
Figure 4: ISM Radio menu
10.
ISM Radio
DX80 ID: x
Auto Detect Radio
Advanced Options
Max Node Count: xx
Binding #: xxxxxx
RF Ctrl: Dip 1.00W
DHCP
Ethernet
IP:
SN:
GW:
Reset
Provision Cell
DXM Modbus ID: xxx
LCD Contrast: xx
Restart
Figure 5: System Config menu
© Banner Engineering Corp. www.bannerengineering.com
to change the value
to accept
ENTER
to return to the previous menu
BACK
Binding and Conducting a Site Survey with the
New ISM Modbus ID: x
Radio Detected Type: DX80
ID: 1
Ref Type: DX80
Ref Modbus ID: x
New ISM Max Nodes: xx
New ISM Binding Code: xxxxxx
Update DHCP Mode
After making changes to the
Ethernet settings, restart the DXM.
Update IP Address
Update SN
Update GW Address
Resets Ethernet parameters
to xml defaults.
to change the value
to accept
ENTER
BACK
to return to the previous me
Conduct
Advertisement
Table of Contents
