Table of Contents
Advertisement
C
I
ONFIGURATION
NSTRUCTIONS
8.1.2. Create a One-Time Event
Define one-time events to update registers at any time within a calendar year.
C
:
ONTEXT
Similar to Weekly events, the times can be specific or relative to sunrise or sunset. Define one-time events using the Scheduler > One Time
Events screen.
1.
Click on Add One Time Event.
S
R
:
A new one-time event is created.
TEP
ESULT
2.
Click on the arrow to expand the parameters into view.
S
R
:
The user-defined parameters are displayed.
TEP
ESULT
3.
Name your one-time event by clicking on the name link and entering a name.
4.
Enter the local register.
5.
Enter the starting time, date, and starting value for the local register.
6.
Enter the ending time, date, and ending value for the local register.
8.1.3. Create a Holiday Event
Use the Scheduler > Holidays screen to create date and/or time ranges that interrupt weekly events.
C
:
ONTEXT
Click on Add Holiday.
1.
S
R
:
A new rule is created.
TEP
ESULT
2.
Enter a name your new holiday rule.
3.
Select the start date and time for the new holiday.
4.
Select the stop date and time for the new holiday.
8.2. Authentication Setup
The DXM1200 has three different areas that can be configured to require a login and password authentication.
•
Webserver/ Cloud Services Authentication
•
Mail Server Authentication
•
DXM Configuration Authentication
The webserver and mail server authentication depends upon the service provider.
8.2.1. Set the Controller to use Authentication
The DXM1200 can be configured to send login and password credentials for every HTTP packet sent to the webserver. This provides another
layer of security for the webserver data.
C
:
ONTEXT
Configuration requires both the webserver and the DXM1200 to be given the same credentials for the login and password. The webserver authen-
tication username and password are not stored in the XML configuration file and must be stored in the DXM1200.
1.
From within the DXM Configuration Software, go to the Settings > Cloud Services screen.
2.
In the upper right, select Show advanced settings.
42
Figure 2: Scheduler > One Time Events screen
Figure 3: Scheduler > Holidays screen
© Banner Engineering Corp. www.bannerengineering.com
Advertisement
Table of Contents
