Table of Contents
Advertisement
LCD
M
S
AND
ENU
YSTEM
System Info
Controller
Displays the date, build, model, and serial number.
Push
Shows the current parameters loaded from the XML configuration that applies to pushing data to a webserver, including method (Ethernet or cellular), interval,
URL, page, HTTPS, and site ID.
ISM Radio
Displays the serial number, model, date, firmware part numbers, and version numbers.
Ethernet
Displays the IP address, MAC address, DHCP, Gateway address, and DNS settings.
Cell
Shows the cellular MEID number (Mobil Equipment Identifier), MDN (Mobil Device Number), version, signal, firewall setting, and firewall mask. Some of these
parameters are not visible until the cellular network is accessed.
Wifi
Displays the Wifi IP address and other settings.
Sript
Displays the name of the ScriptBasic file running.
LCD Board
Displays the serial number, model, date, firmware part numbers, and version numbers.
6.6. Display Lock
Display Lock protects the DXM LCD menu system from being used until the proper pass code is entered.
36
Controller
Date:
Firmware:
Build:
Model:
Serial:
Push
Method:
Interval: hh:mm
URL:
Page:
Https: on/off
Site ID:
ISM Radio
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
Ethernet
DHCP:
IP:
Subnet:
Gate:
Mac:
DNS1:
DNS2:
Cell
Signal:
Phn#:
Dev#:
SIM:
CellVer:
CellMdl:
CellFw:
CellMask:
Figure 6: System Info menu
© Banner Engineering Corp. www.bannerengineering.com
to change the value
to accept
ENTER
to return to the previous menu
BACK
Wifi
IP:
Mode:
AP:
Stat:
Script
Path:
Baud:
Code:
LCD Board
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
Advertisement
Table of Contents
