Table of Contents
Advertisement
Receiving Faxes
TEL
mode!
(answering all calls manually)
If the AUTO ANSWER light is on, turn it off by pressing
(AUTO\ANSWER).
Display:
When the unit rings, lift the handset to answer the
1
call.
When:
2
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press (START/SET/COPY).
3
Replace the handset.
≥The unit will start reception.
Note:
≥If you do not answer the call within 15 rings, the unit
will temporarily switch to the fax and the caller can
send documents.
≥Manual feeding is not available for receiving
documents.
To stop receiving
Press (STOP).
Friendly reception feature
When you answer a call and hear a fax calling tone
(slow beep), the unit will automatically start
receiving.
≥If this feature is not required, set to "OFF" (p. 77).
62
TEL MODE
CONNECTING.....
Memory reception
When a printing problem is detected, the unit will
temporarily store the received document into
memory.
While document is in memory, the unit will:
— display an error message and the following
— alert you with a slow beep (memory reception
≥Follow the instructions on pages 106 and 107 to
≥For memory capacity, see page 129.
OFF
Handset
(STOP)
START/SET/COPY
message alternately.
Display:
alert).
solve the problem and print the stored document.
AUTO ANSWER
FAX ON
FAX IN MEMORY
Advertisement
Table of Contents
