Table of Contents
Advertisement
8
Open the protection bag by cutting the end of the
bag and remove the drum unit.
9
Remove the protection cap.
10
Remove the protection sheet.
Caution:
≥Do not touch or scratch the green drum surface
as this may damage the drum unit.
≥Do not expose the drum unit to light for more
than 5 minutes as this may damage the drum
unit.
11
Install the new drum unit on the toner cartridge
by holding the two tabs and matching the
triangles.
12
Close the top cover securely by pushing down on
the dotted area at both ends.
For assistance, call 1-800-435-7329.
Replacement
Protection bag
Protection cap
Green drum
surface
Tabs
Toner cartridge
Drum unit
Protection
sheet
Drum unit
Triangles
Dotted area
119
Advertisement
Table of Contents
