Date And Time, Your Logo And Facsimile Telephone Number; Setting The Date And Time - Panasonic KX-FLM600 Operating Instructions Manual

Date and time, your logo and facsimile
telephone number!
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991.
Example:
FROM : Panasonic Fax

Setting the date and time

Press (MENU).
1
Display:
Press (#), then (0)(1).
2
Press (START/SET/COPY).
3
4 Enter the correct month/day/year by selecting each
2 digits using the dial keypad.
Example: Aug. 10, 1999
Press (0)(8) (1)(0) (9)(9).
Press (START/SET/COPY).
5
6 Enter the correct hour/minute by selecting each
2 digits using the dial keypad.
Press ($) to select "AM" or "PM".
Example: 3:15PM
1. Press (0)(3) (1)(5).
2. Press ($) until "PM" is displayed.
Your logo Your facsimile telephone number
FAX NO. : 1234567
Fax Correspondence
1.SYSTEM SET UP
SET DATE & TIME
M:01/D:01/Y:99
Cursor
M:08/D:10/Y:99
TIME: 12:00AM
TIME: 03:15AM
TIME: 03:15PM
Date and time
Feb. 26 1999 04:02PM
Press (START/SET/COPY).
7
SETUP ITEM [
Press (MENU).
8
/
STOP
START/SET/COPY
Note:
≥To enter the year 2000 in step 4, press (0)(0)
for the correct year.
≥You can enter the number by rotating
(JOG\DIAL) in steps 4 and 6. In this case,
press (fl) to move the cursor.
≥The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
≥Press (fi) or (fl) to move the cursor to the
incorrect number, then make the correction.
≥If you press (STOP) while programming, the
display will return to the previous one.
Setup
P1
]
MENU
JOG DIAL
29