Table of Contents
Advertisement
Fax - sending (cont.)
Problem
I cannot make an international fax
call.
Fax - receiving
Problem
I cannot receive documents.
I cannot receive documents
automatically.
The display shows
"CONNECTING....." but faxes are not
received.
The recording image is faint.
Receive mode
Problem
I cannot select the desired receive
mode.
Copying
Problem
The unit does not make a copy.
White lines or black lines appear on
the copied document.
≥Use the overseas transmission mode (p. 57).
≥Add two pauses at the end of the telephone number (p. 35) or dial
manually.
≥The telephone line cord is connected to the EXT jack on the unit.
Connect to the LINE jack (p. 27).
≥The receive mode is set to the TEL mode. Set to the FAX ONLY or
TEL/FAX mode.
≥The time taken to answer a call is too long. Decrease the number
of rings (p. 64, 73).
≥The incoming call is not a fax. Change the receive mode to the TEL
mode.
≥The sender transmitted a faint document. Ask them to transmit a
clearer copy of the document.
≥If you want to set the FAX ONLY or TEL/FAX mode:
—Select the desired mode using feature #77 (p. 72), and
—Press (AUTO\ANSWER) to turn on the AUTO ANSWER light.
≥If you want to set the TEL mode:
—Press (AUTO\ANSWER) to turn off the AUTO ANSWER light.
≥You cannot make a copy during programming. Make the copy after
programming or stop the programming.
≥The white roller is dirty. Clean it (p. 116).
For assistance, call 1-800-435-7329.
Operations
Cause & Remedy
Cause & Remedy
Cause & Remedy
(RED)
OFF
Cause & Remedy
AUTO ANSWER
ON
FA X ON
AUTO ANSWER
FA X ON
109
Advertisement
Table of Contents
