Table of Contents
Advertisement
Connecting
This feature allows you to hear connecting tones, such as a fax tone, ring back tone or busy tone for several
seconds when you send a fax using the One-Touch Dial or JOG DIAL directory. This will tell you the status of
the other party's machine.
If you hear a:
—Fax tone:
The other party's machine is ready for reception.
—Ring back tone:
If this tone continues, the other party's machine may not be a facsimile or may have run
out of paper. Check with the other party.
The other party's machine is busy. Let the unit continue redialing or press (STOP) and try
—Busy tone:
again later.
This feature is set to "ON" as a pre-selected setting. If this feature is not required, you can turn it off.
Press (MENU).
1
Display:
Press (#), then (7)(6).
2
Press (START/SET/COPY).
3
4
Press
or
to select the desired setting.
≥If this feature is not required, select "OFF".
Press (START/SET/COPY).
5
Press (MENU).
6
Note:
≥The connecting tone volume cannot be adjusted.
tone!
1.SYSTEM SET UP
CONNECTING TONE
MODE=ON
SETUP ITEM [
]
Sending Faxes
MENU
/
STOP
START/SET/COPY
59
Advertisement
Table of Contents
