Table of Contents
Advertisement
Display message
PC FAIL OR BUSY
PLEASE WAIT
REDIAL TIME OUT
REMOVE DOCUMENT
REMOVE PAPER
TONER EMPTY
TONER LOW
TOP COVER OPEN
TRANSMIT ERROR
UNIT OVERHEATED
USE 1 FEED ONLY
WRONG PAPER
The fax function cannot be operated by the PC. The printer cable is not
connected correctly, or the software is not running on the PC (p. 82–85).
The top cover was closed. Wait a while.
(START/SET/COPY) was pressed during the power save mode. Wait a while.
The other party's fax machine is busy or has run out of recording paper. Try
again.
The document is jammed. Remove the jammed document (p. 116).
Attempted to transmit a document longer than 600 mm (23
button to remove the document. Divide the document into two or more sheets
and try again.
Paper was placed on the paper tray for manual feeding without first pressing
(START/SET/COPY). Remove the paper. When the "PLEASE WAIT" message
disappears, place the paper on the paper tray.
The paper cassette is not inserted correctly. Insert it correctly.
The toner is empty. Replace the toner cartridge and drum unit with new ones
(p. 117–119).
The remaining toner is low. Replace the toner cartridge and drum unit with new
ones as soon as possible (p. 117–119).
The top cover is open. Close it.
Transmission error occurred. Try again.
The unit is too hot. Let the unit cool down.
When making transmission or copying, another sheet was placed on the paper
tray. Remove it from the paper tray and try again.
The unit printed on paper which is shorter than letter size paper. To prevent the
drum unit becoming dirty, use letter or legal size paper and set the correct
recording paper size in feature setting #16 (p. 28).
For assistance, call 1-800-435-7329.
Error Messages
Cause & Remedy
q). Press the (STOP)
5
⁄
8
107
Advertisement
Table of Contents
