Connecting Tone - Panasonic KX-FP250 Operating Instructions Manual

Connecting tone

This feature allows you to hear connecting tones, such as a fax tone, ring back tone or busy tone for several
seconds when you send a fax using One-Touch Dial or the JOG DIAL directory. This will tell you the status of
the other party's machine.
If you hear a:
— Fax tone: The other party's machine is ready for reception.
— Ring back tone: If this tone continues, the other party's machine may not be a facsimile or ran out of paper.
Check with the other party.
— Busy tone: The other party's machine is busy. Let the unit continue redialing or press
again later.
If this feature is not required, turn it off.
1 Press .
MENU
Display:
2
Press , then 7 6
3
Press START/COPY/SET
4
Press or to select the desired setting.
If this feature is not required, select "OFF".
5
Press
START/COPY/SET
6 Press .
MENU
Note:
The connecting tone volume cannot be adjusted.
1.SYSTEM SET UP
.
CONNECTING TONE
.
MODE=ON
.
SETUP ITEM [ ]
Sending Faxes
Dial keypad
STOP
START/COPY/SET
STOP and try
MENU
/
55