The Developer Temperature Is Too Low - AGFA Classic E.O.S. Reference Manual

The developer temperature is too low

The following message indicates that the developer temperature is too low:
(UURU 
6HH PDQXDO
The Classic E.O.S. has an integrated safety switch, that prevents the developer
from overheating in case the level of developer should drop too low. If this
should happen, you have to:
Check the developer level and fill the tank if necessary.
or fixer level is too low' on page 79.
Reset the developer safety switch, as described below.
Disconnect the processor from the mains.
1
Remove the top cover.
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
88
√
2
1
Refer to 'The developer
1280C GB 20001204