Clean The Feed Table And Film Scanner - AGFA Classic E.O.S. Reference Manual

Clean the feed table and film scanner

Clean the feed table at the beginning of each working day to prevent streaks or
impurities on the film.
Do not clean the film scanner every day, but you can remove it to clean the feed
table completely. Clean the film scanner only when necessary. The film scanner
measures the surface of the film when it is introduced. This assures convenient
replenishment rates for the chemicals, depending on the film sizes.
When cleaning the film scanner make sure to handle the film scanner
rollers with care. Do not damage them.
1
Remove the film scanner housing by pulling it horizontally from its latches.
You are reminded to handle all chemicals with care, to wear protective gloves and an
apron to protect your clothing, and to wear protective glasses for your safety. Always
conform to local regulations regarding the disposal of chemicals.
54
1280C GB 20001204