Switching The Classic E.o.s. On - AGFA Classic E.O.S. Reference Manual

Switching the Classic E.O.S. on

Before switching on
When operating the processor for the first time, make sure that the processor has
been installed in accordance with the Agfa installation instructions.
1
Make sure the machine is connected to the power supply.
2
Make sure all drain valves are closed by turning clockwise.
3
Make sure the water tap is opened.
4
Make sure the chemical tanks are filled.
5
Make sure all covers are properly installed and that the interlock switches are
engaged.
6
Make sure the feed table and exit tray are clean.
7
Make sure the ground fault switch is not switched off.
1280C GB 20001204
17