Jammed film
If the film you inserted for processing is not deposited in the film exit tray, it may
be jammed in its transport path.
A film jam can occur:
in the roller sets of the developer [1], fixer [2] or water tanks [3],
in the squeegee roller section [4],
in the dryer transport roller section [5].
(Procedure for skilled service personnel only.)
If the film gets caught somewhere on its way through the processor, you have to
check each section systematically, preferably starting with the squeegee roller
section.
Disconnect the processor from the mains before starting to remove a
jammed film.
1280C GB 20001204
1
2
3
4
5
85