Customizing The Processing Parameters - AGFA Classic E.O.S. Reference Manual

Customizing the processing parameters

Overview
The following processing parameters can be set to optimize the sensitometric
stability of the system.
It may be possible that all parameters settings are password protected, except
for the dryer setting. Refer to qualified service personnel if settings need to be
changed and a password must be entered.
Processing cycle.
Developer temperature.
Dryer setting.
(Default stage 05 for RP and IP; 07 for HT)
Developer replenishment rate.
Fixer replenishment rate.
Standby developer and fixer replenishment
(jog cycle).
Setting the start-up replenishment function.
Language.
Autofill.
30
Processing parameter Default setting
RP
34 °C
Stage 05
400 ml/m
2
400 ml/m
2
AUTO
Deactivated
Country
specific
OFF
Refer to
34
36
38
40
43
45
47
49
50
1280C GB 20001204